Locating The Install Bundle For Cisco Sdm - Cisco ROUTER-SDM-CD User Manual

Creating an SSL VPN Connection
Note
Advanced Button

Locating the Install Bundle for Cisco SDM

Note
Cisco Router and Security Device Manager 2.5 User's Guide
21-16
Example 21-1 Full Tunnel Package Installed on Router
flash:sslclient-win-1.0.2.127.pkg
In Example 21-1, the Full Tunnel install bundle is loaded in router flash. If your
router's primary device is a disk or a slot, the path that you see will start with
or .
disk n slot n
If this field is empty, you must locate the install bundle so that Cisco SDM can
load it onto the router primary device, or download the software install bundle
from Cisco.com by clicking on the Download latest... link at the bottom of the
window. This link takes you to the following web page:
http://www.cisco.com/cgi-bin/tablebuild.pl/sslvpnclient
You may need a CCO username and password in order to obtain software from
Cisco software download sites. To obtain these credentials, click Register at the
top of any Cisco.com webpage and provide the information asked for. Your userid
and password will be e-mailed to you.
Click Locating the Install Bundle for Cisco SDM
Tunnel software install bundle, and supply a path to it for Cisco SDM to use.
Click to configure advanced options such as split tunneling, split DNS, and client
Microsoft Internet Explorer settings.
Use the following procedure to locate software install bundles for Cisco SDM so
that it can use that location in the Cisco IOS SSL VPN configuration, or, if
necessary, load the software onto the router.
You may need a CCO username and password in order to obtain software from
Cisco software download sites. To obtain these credentials, click Register at the
top of any Cisco.com webpage and provide the information asked for. Your userid
and password will be e-mailed to you.
Chapter 21 Cisco IOS SSL VPN
to learn how to locate the Full
OL-4015-12