Cisco ROUTER-SDM-CD User Manual page 642

Edit IPS
Use Event Action Overrides
Select All
Add and Edit Buttons
Delete
Enable and Disable
Apply Changes
Cisco Router and Security Device Manager 2.5 User's Guide
27-30
Check the Use Event Action Overrides box to enable Cisco IOS IPS to use event
action overrides. You can add and edit event action overrides whether or not they
are enabled on the router.
The Select All button works with the Enable, Disable and Delete buttons. If you
want to enable or disable all event action overrides, click Select All and then click
Enable or Disable. To remove all event action overrides, click Select All, and
then click Delete.
Click Add to display a dialog in which you can enter the information for an event
action override. Choose an event action override, and click Edit to change the
information for an event action override.
Click Delete to remove the event action overrides that you selected, or to remove
all event action overrides if you clicked Select All.
The Enable and Disable buttons allow you to enable or disable event action
overrides. Choose one event action override, or click Select All to enable or
disable all event action overrides.
When you have entered the information that you want in the Event Action
Overrides window, click Apply Changes. The Apply Changes button is disabled
when there are no changes to send to the router.
Chapter 27 Cisco IOS IPS
OL-4015-12