Cisco ROUTER-SDM-CD User Manual page 300

Creating an Easy VPN Remote Connection
Table 12-2 Network Information Fields (continued)
Element
Device Reachability
Do you have devices at your client location
that must be reached from the server-side
networks or other client locations?
Easy VPN Remote Wizard: Identical Address Configuration
Table 12-3 Identical Address Configuration Fields
Element
Accessible Devices
Device Local IP
Device Global IP
Add
Edit
Delete
Cisco Router and Security Device Manager 2.5 User's Guide
12-6
Enter the local and global IP addresses of the devices that must be reached from
networks that the router connects to through the Easy VPN server in this screen.
Field Reference
Table 12-3 describes the fields in th is screen.
Description
The local IP address of a device that is identified as a device that must be
reached by other networks.
The global IP address given to a device that is identified as a device that must
be reached by other networks. Because the global IP address for each device
must be routable from the Easy VPN server, you must obtain these addresses
from the Easy VPN server administrator. Each IP address must be on the same
subnet, and one address must be reserved for use by non accessible devices on
the local network.
To add the local IP address and global IP address of a device, click Add.
To change the IP address information for a device, choose an entry and click
Edit.
To remove an entry for an accessible device, choose the entry and click Delete.
Description
Yes—Click Yes if there are devices on the local network,
such as printers, that must be reached from networks that
the router connects to through the Easy VPN server.
No—Click No if there are no devices that must be
reached from networks that the router connects to
through the Easy VPN server.
Chapter 12 Easy VPN Remote
OL-4015-12