User Authentication - Cisco ROUTER-SDM-CD User Manual

Creating an SSL VPN Connection
Allow Cisco SDM access through IP Address Checkbox
Note
Digital certificate
Information area

User Authentication

Cisco Router and Security Device Manager 2.5 User's Guide
21-8
Check if you want to continue to access Cisco SDM from this IP address. This
checkbox appears if you entered the IP address you are currently using to access
Cisco SDM.
If you check this checkbox, the URL that you must use to access Cisco SDM
changes after you deliver the configuration to the router. Review the information
area at the bottom of the window to learn which URL to use. Cisco SDM places a
shortcut to this URL on the desktop of your PC that you can use to access Cisco
SDM in the future.
If you are creating a new gateway, select the digital certificate that you want the
router to present to clients when they log in to the gateway. If you chose the IP
address of an existing gateway, the router will use the digital certificate
configured for that gateway, and this field is disabled.
When you provide the information in the IP Address and Name fields, this area
contains the URL that users will enter. You must provide this URL to the users for
whom you are creating this Cisco IOS SSL VPN.
If you checked Allow Cisco SDM access through IP address, the URL that you
must use in the future to access Cisco SDM is shown in this area. Cisco SDM
places a shortcut to this URL on the desktop of your PC after you deliver the
Cisco IOS SSL VPN configuration to the router.
Use this window to specify how the router is to perform user authentication. The
router can authenticate Cisco IOS SSL VPN users locally, or it can send
authentication requests to remote AAA servers.
Chapter 21 Cisco IOS SSL VPN
OL-4015-12