Cisco ROUTER-SDM-CD User Manual page 143

Chapter 6 Edit Interface/Connection
Operating Mode
Enable Multilink PPP
Authentication
Dynamic DNS
Note
OL-4015-12
CO
Central office.
Choose one of the values below:
Annex A (U.S.)
Configures the regional operating parameters for North America.
Annex B (Europe)
Configures the regional operating parameters for Europe.
Check this check box if you want to use Multilink Point-to-Point Protocol (MLP)
with this interface. MLP can improve the performance of a network with multiple
WAN connections by using load balancing functionality, packet fragmentation,
bandwidth-on-demand, and other features.
Click if you need to enter
Enable dynamic DNS if you want to update your DNS servers automatically
whenever the WAN interface IP address changes.
This feature appears only if supported by the Cisco IOS release on your router.
To choose a dynamic DNS method to use, do one of the following:
Enter the name of an existing dynamic DNS method.
•
Enter the name in the Dynamic DNS Method field exactly as it appears in the
list in Configure > Additional Tasks > Dynamic DNS Methods.
Choose an existing dynamic DNS method from a list.
•
Cisco Router and Security Device Manager 2.5 User's Guide
CHAP or PAP authentication information.
Connection: G.SHDSL
6-33