Add Or Edit Ipsec Profile - Cisco ROUTER-SDM-CD User Manual

Chapter 17 IP Security
Edit
Delete
Details of IPSec Profile

Add or Edit IPSec Profile

Transform Set Columns
IKE Profile Association
OL-4015-12
Select an existing profile and click Edit to change the profile configuration.
Click to edit a selected IPSec profile. If the profile you are deleting is currently
used in a DMVPN tunnel, you must configure the DMVPN tunnel to use a
different IPSec profile.
This area displays the configuration of the selected IPSec profile. For a
description of the information displayed in this area see
Enter the information to create an IPSec profile in this dialog. An
specifies the transform sets to be used, how the Security Association (SA) lifetime
is to be determined, and other information.
Use the two columns at the top of the dialog to specify the transform sets that you
want to include in the profile. The left-hand column contains the transform sets
configured on the router. To add a configured tranform set to the profile, select it
and click the >> button. If there are no tranform sets in the left-hand column, or
if you need a transform set that has not been created, click Add and create the
transform set in the displayed dialog.
If you want to associate an
profile from the list. If an IKE profile has already been associated, this field is
read only.
Cisco Router and Security Device Manager 2.5 User's Guide
IKE profile with this IPSec profile, choose an existing
IPSec Profiles
Add or Edit IPSec Profile.
IPSec profile
17-13