Cisco ROUTER-SDM-CD User Manual page 743

Chapter 31 Router Properties
Error Message
SDM Warning: Unsupported Access Control Entry
Error Message
SDM Warning: SDM Not Allowed
OL-4015-12
If "any" is associated with destination, it allows access to any node on the
–
network supported by the router.
You can remove the access entry that caused this
Recommended Action
message to appear by choosing the rule in the Rules window and clicking
Edit. Alternatively, in the Interfaces and Connections window, you can
disassociate the rule from the interface it is applied to.
A management policy will be read only if unsupported access
Explanation
control entries (ACEs) are associated with the interface or vty line to which
you applied the management policy. You can use the CLI to remove the
unsupported ACEs. Unsupported ACEs are those that contain keywords or
syntax that Cisco SDM does not support.
This message is displayed if you still have not configured a
Explanation
management access policy to allow a host or network to access Cisco SDM
on this router.
You must provide such a policy in order to make Cisco
Recommended Action
SDM on this router accessible. You cannot navigate to other features or
deliver commands to the router until you configure a management access
policy to allow access to Cisco SDM for a host or network.
Cisco Router and Security Device Manager 2.5 User's Guide
vty Settings
31-21