Cisco ROUTER-SDM-CD User Manual page 687

Chapter 29 Quality of Service
Table 29-2 Queuing for Outbound Traffic (continued)
Element
Bandwidth Percentage
Allocated Bandwidth
Add Class
Remove
Add a New Traffic Class
Table 29-3 Add New Traffic Class Fields
Element
Class Name
OL-4015-12
Description
To specify the bandwidth percentage for a traffic class, enter the
percentage value for that class. Traffic types that depend on high
transmission rates, such as voice traffic, should be given a higher
percentage than traffic classes that do not need high transmission
rates, such as routing traffic.
The Cisco SDM default traffic classes are displayed with suggested
values. When you change the percentage value of any traffic class,
the best effort class adjusts to a higher or lower value. The total
bandwidth of all classes other than best effort cannot exceed 75%.
Cisco SDM displays the Allotted Bandwidth column when you
configure a QoS policy for a non-VTI interface. It displays the
kilobits per second allotted to the traffic class based on the CIR and
the bandwidth percentage entered.
To add a traffic class to this policy, click Add Class and enter the
class information in the displayed dialog.
To remove a traffic class from this list that you have created, select
the list and click Remove. Cisco SDM default classes cannot be
removed.
Add a new traffic class in this screen.
Field Reference
Table 29-3 describes the fields in this screen.
Description
Enter a name for the traffic class.
Cisco Router and Security Device Manager 2.5 User's Guide
Creating a QoS Policy
29-5