Add Or Edit Dynamic Address Translation Rule: Outside To Inside - Cisco ROUTER-SDM-CD User Manual

User guide
Table of Contents

Advertisement

Network Address Translation Rules

Add or Edit Dynamic Address Translation Rule: Outside to Inside

Note
Direction
Cisco Router and Security Device Manager 2.5 User's Guide
26-26
Use this help topic when you have chosen From Outside to Inside in the Add
or the Edit Dynamic Address Translation Rule window.
Add or edit an address translation rule in this window. If you are editing a rule,
the rule type (static or dynamic) and the direction are disabled. If you need to
change these settings, delete the rule, and re-create it using the settings you want.
A dynamic address translation rule dynamically maps hosts to addresses, using
addresses included in a pool of addresses that are globally unique in the
destination network. The pool is defined by specifying a range of addresses and
giving the range a unique name. The configured router uses the available
addresses in the pool (those not used for static translations or for its own WAN IP
address) for connections to the Internet or other outside network. When an address
is no longer in use, it is returned to the address pool to be dynamically assigned
to another device later.
If you create a NAT rule that would translate addresses of devices that are part of
a VPN, Cisco SDM will prompt you to allow it to create a route map that protects
those addresses from being translated by NAT. If NAT is allowed to translate
addresses of devices on a VPN, their translated addresses will not match the IPSec
rule used in the IPSec policy, and traffic will be sent unencrypted.
Choose the traffic direction for this rule.
From outside to inside
Choose this option if you want to translate incoming addresses to addresses that
will be valid on your LAN. You may want to do this when you are merging
networks and must make one set of incoming addresses compatible with an
existing set on the LAN served by the router.
This help topic describes how the remaining fields are used when From outside to
inside is chosen.
Chapter 26
Network Address Translation
OL-4015-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Router and security device manager 2.5

Table of Contents