Edit Interface/Connection - Cisco ROUTER-SDM-CD User Manual

Add
Edit
OL-4015-12

Edit Interface/Connection

This window displays the router's interfaces and connections. The window also
enables you to add, edit, and delete connections, and to enable or disable
connections.
When you choose an unconfigured physical interface and click Add, the menu
contains choices for adding a connection on that interface. Click Add to create a
new loopback or tunnel interface. If the Cisco IOS image on the router supports
Virtual Template Interfaces (VTI), the context menu contains an option to add a
VTI. If there are switch ports present on the router, you can add a new VLAN.
If you want to reconfigure an interface, and see no choices except Loopback and
Tunnel when you click Add, choose the interface and click Delete. All the types
of connections available for that kind of interface will appear in the Add menu.
Click Available Interface Configurations
available for an interface.
When you choose an interface and click Edit, a dialog appears. If the interface is
a supported and configured interface and is not a switch port, the dialog will have
the following tabs:
Connection
•
Association tab
•
NAT tab
•
Cisco Router and Security Device Manager 2.5 User's Guide
C H A P T E R
to see what configurations are
6
6-1