Cisco ROUTER-SDM-CD User Manual page 502

Editing SSL VPN Connections
Table 21-1 SSL VPN Context Fields
Element
Name
Associated Gateway
Domain
Authentication List
Authentication Domain
Enable Context
Maximum Number of Users
VRF Name
Cisco Router and Security Device Manager 2.5 User's Guide
21-24
Description
Enter the name of a new context, or choose the name of an existing
context to edit it.
Select an existing gateway, or click Create gateway to configure a
new gateway for the context. The gateway contains the IP address
and digital certificate is used for this context. Each gateway requires
a unique public IP address.
If you have a domain for this context, enter it in this field. Cisco IOS
SSL VPN users will be able to use this domain name when
accessing the portal, instead of an IP address. An example is
mycompany.com.
Choose the AAA method list to be used to authenticate users to this
context.
Enter the domain name that is to be appended to the username
before it is sent for authentication. This domain must match the
domain used on the AAA server for the users that will be
authenticated for this context.
Check Enable Context if you want the context to be enabled when
you finish configuring it. You do not have to return to this window
to disable it if you enable it here. You can enable and disable
individual contexts in the Edit SSL VPN tab.
Enter the maximum number of users that should be allowed to use
this context at one time.
Enter the VPN Routing and Forwarding (VRF) name for this
context. This VRF name must have already been configured on the
router.
Chapter 21 Cisco IOS SSL VPN
OL-4015-12