This Feature Not Supported - Cisco ROUTER-SDM-CD User Manual

Chapter 39 Configuration Management

This Feature Not Supported

Resetting the router to its factory default configuration changes the router's inside
interface IP address back to 10.10.10.1. The next time you log on to the router
with your browser, enter the IP address 10.10.10.1 in the browser's location field.
This Feature Not Supported
This window appears when an Cisco SDM feature is not supported. This may be
because the router is running a Cisco IOS image that does not support the feature,
or because Cisco SDM is being run on a PC and cannot support the feature.
Cisco Router and Security Device Manager 2.5 User's Guide
39-6
OL-4015-12