Configure Dsl Controller - Cisco ROUTER-SDM-CD User Manual

Chapter 6 Edit Interface/Connection

Configure DSL Controller

Controller Mode
Equipment Type
Operating Mode
Line Mode
Line Number
OL-4015-12
Cisco SDM supports the configuration of the Cisco WIC-1SHDSL-V2. This WIC
supports TI, E1, or a G.SHDSL connection over an ATM interface. Cisco SDM
only supports a G.SHDSL connection using the ATM interface. This window lets
you set the controller mode on the WIC to ATM, enabling a G.SHDSL connection,
and lets you create or edit DSL controller information for the G.SHDSL
connection.
Cisco SDM supports only ATM mode, which provides for a G.SHDSL
connection, on this controller. This field will automatically be set to ATM mode
when the OK button is clicked.
Choose whether your connection terminates at the central office (CO) or your
customer premises equipment (CPE).
Choose whether the DSL connection should use Annex A signaling (for DSL
connections in the United States) or Annex B signaling (for DSL connections in
Europe).
Choose whether this is a 2-wire or 4-wire G.SHDSL connection.
Choose the interface number on which the connection will be made.
Cisco Router and Security Device Manager 2.5 User's Guide
Configure DSL Controller
6-35