IPS Signature Statistics
SDEE Log
IPS Signature Statistics
Update and Clear Buttons
SDEE Log
Signature List Area
Cisco Router and Security Device Manager 2.5 User's Guide
42-38
Click to view SDEE messages. You can also view these messages by clicking
Monitor > Logging > SDEE Message Log.
This window is displayed if the router is using an IOS IPS 5.x configuration.
Statistics are displayed for each enabled signature in the IOS IPS configuration.
The top of the window displays signature totals to provide a snapshot of the
signature configuration. The following totals are provided:
Total Signatures
•
Total Enabled Signatures
•
Total Retired Signatures
•
Total Compiled Signatures
•
Click Update to check for and include the latest signature statistics. Click Clear
to set set all signature statistic counters to 0.
Click to view SDEE messages. You can also view these messages by clicking
Monitor > Logging > SDEE Message Log.
The Signature ID, Description, number of hits, and drop count is shown for all
signatures. If packet arrives that matches a signature, the source and destination
IP addresses are listed as well.
Chapter 42
Viewing Router Information
OL-4015-12