Firewall Status - Cisco ROUTER-SDM-CD User Manual

Chapter 42 Viewing Router Information
Note
Chart Area
Note

Firewall Status

OL-4015-12
The last three options will retrieve a maximum of 60 data points. After 60 data
points have been retrieved, Cisco SDM will continue to poll data, replacing the
oldest data points with the newest ones.
Show Table/Hide Table
Click this button to show or hide the performance charts.
Reset button
Click this button to reset the interface statistic counts to zero.
This area shows the charts and simple numerical values for the data specified.
The last three options will retrieve a maximum of 30 data points. After 30 data
points have been retrieved, Cisco SDM will continue to poll data, replacing the
oldest data points with the newest ones.
This window displays the following statistics about the
router:
Number of Interfaces Configured for Inspection—The number of interfaces
•
on the router that are configured to have traffic inspected by a firewall.
Number of TCP Packets Count—The total number of TCP packets
•
transmitted through the interfaces configured for inspection.
Number of UDP Packets Count—The total number of UDP packets
•
transmitted through the interfaces configured for inspection.
• Total number of active connections—The count of current sessions.
The Firewall Status window also displays active firewall sessions in a table with
the following columns:
Source IP Address—The IP address of the packet's origin host.
•
Cisco Router and Security Device Manager 2.5 User's Guide
Firewall Status
firewall configured on the
42-9