Lan Wizard: Switch Port - Cisco ROUTER-SDM-CD User Manual

LAN Wizard: Switch Port

Element
Single Device
Network Device
LAN Wizard: Switch Port
Element
Existing VLAN
New VLAN
Include this VLAN in an
IRB bridge...
Cisco Router and Security Device Manager 2.5 User's Guide
3-6
Field Reference
Table 3-6 IP Address and Subnet Mask
Description
If this switch port will be connected to a single device, such as a single PC
or IP phone, or if this device will be connected to a port on a networking
device, such as another switch, that is an access mode port, then choose
Single Device.
If this switch port will be connected to a port on a network device, such as
another switch, that is a trunking mode, choose Network Device.
This screen lets you assign an existing VLAN number to the switch port or to
create a new VLAN interface to be assigned to the VLAN switch port.
Field Reference
Table 3-7 IP Address and Subnet Mask
Description
If you want to assign the switch port to a VLAN that has already been
defined, such as the default VLAN (VLAN 1), enter the VLAN ID number
in the Network (VLAN) Identifier field.
If you want to create a new VLAN interface to which the switch port will
be assigned, enter the new VLAN ID number in the New VLAN field, and
then enter the IP address and subnet mask of the new VLAN logical
interface in the IP Address and Subnet Mask fields.
If you want the switch port to form part of a bridge with your wireless
network, check this box. The other part of the bridge must be configured
using the Wireless Application. The IP address and Subnet mask fields
under New VLAN are disabled when this box is checked.
Chapter 3 LAN Wizard
OL-4015-12