Table of Contents
Advertisement
LAN Wizard: DHCP Address Pool
LAN Wizard: DHCP Address Pool
Note
Element
Starting IP
Ending IP
DNS Server and WINS
Server Fields
DHCP Options
Cisco Router and Security Device Manager 2.5 User's Guide
3-4
This screen lets you configure the DHCP IP address pool. The IP addresses that
the
DHCP
server assigns are drawn from a common pool that you configure by
specifying the starting IP address in the range, and the ending address in the
range.
For more information, see
If there are discontinuous address pools configured on the router, then the
Starting IP and Ending IP address fields will be read-only.
Field Reference
Table 3-4
DHCP Address Pool
Description
Enter the beginning of the range of IP addresses for the DHCP server to use
in assigning addresses to devices on the LAN. This is the lowest-numbered
IP address in the range.
Enter the highest-numbered
If this window displays DNS Server and WINS Server fields, you can click
DHCP Options
for information on them.
Use this window to configure DHCP options that will be sent to hosts on the LAN
that are requesting IP addresses from the router. These are not options for the
router that you are configuring; these are parameters that will be sent to the
requesting hosts on the LAN. To set these properties for the router, click
Additional Tasks on the Cisco SDM category bar, click DHCP, and configure
these settings in the DHCP Pools window.
DHCP Address
Pools.
IP address
in the range of IP addresses.
Chapter 3
LAN Wizard
OL-4015-12
Advertisement
Table of Contents
Troubleshooting
