Vpn Key Encryption Settings - Cisco ROUTER-SDM-CD User Manual

VPN Global Settings
Table 16-2 VPN Global Settings: Easy VPN Server Fields
Element
Common Pool
Enable Syslog messages

VPN Key Encryption Settings

Cisco Router and Security Device Manager 2.5 User's Guide
16-6
Description
You can configure a common IP address pool for all clients to use.
If a group does not have a specific pool, clients belonging to that
group will be allocated an IP address from this common pool.
Select a common pool—Select a pool name from this list. If no
pools are configured, you click Additional Tasks > Local Pools >
Add, and configure a pool in the displayed dialog. Then, return to
this screen and select it.
Check Enable Syslog messages to enable Syslog messages for
client connections. You can specify the scope of this option with the
following options:
Enable Syslog messages for all client connections—Check this
•
option to enable Syslog messages for all groups that connect to
the Easy VPN server.
Enable Syslog messages for the following groups—Check this
•
option to enable Syslog messages for the groups that you
specify. Then, enter the group names in the box, separating one
group name from another with a comma. A sample set of entries
follows:
WGP-1, WGP-2, ACCTG, CSVC
The router must use Cisco IOS 12.4(4)T or later for this part of the
screen to be displayed.
The VPN Key Encryption Settings window appears if the Cisco IOS image on
your router supports Type 6 encryption, also referred to as VPN key encryption.
You can use this window to specify a master key to use when encrypting VPN
keys, such as pre-shared keys, Easy VPN keys, and XAuth keys. When encrypted,
these keys will not be readable by someone viewing the router's configuration file.
Chapter 16 VPN Global Settings
OL-4015-12