Waas Reference - Cisco ROUTER-SDM-CD User Manual

Chapter 7 Wide Area Application Services
Step 10
Step 11
Step 12
Step 13

WAAS Reference

OL-4015-12
If necessary, enter the enable command, press Enter, and provide the enable
password.
At the Cisco IOS command prompt, enter the following commands:
Router(config)# wccp router-list 1 default_gateway
Router(config)# wccp tcp-promiscuous router-list-num 1
Router(config)# wccp version 2
Replace default_gateway with the IP address of the router that provides a route to
the CM.
In the NM WAAS tab, click Register.
Enter the IP address of the WAAS CM.
a.
Choose the interface on which you want to send the registration request. The
b.
interface that you choose must have a route to the WAAS CM network.
Click OK. Cisco SDM displays a username and password dialog box.
c.
Enter the username and password required to login to the CM.
d.
After the router registers with the CM, the blue https link contains the CM IP
address.
Click on the https link to view the registration status for the Edge WAE on the
router. The CM displays the device registration status as online.
The following sections describe the
NM WAAS
•
Integrated Service Engine
•
WCCP
•
Central Manager Registration
•
Cisco Router and Security Device Manager 2.5 User's Guide
WAAS configuration screens:
WAAS Reference
7-3