Add Or Edit Pre Shared Key - Cisco ROUTER-SDM-CD User Manual

Chapter 18 Internet Key Exchange
If you want to:
Add a pre-shared key to the router's
configuration.
Edit an existing pre-shared key.
Remove an existing pre-shared key.

Add or Edit Pre Shared Key

Key
Reenter Key
Peer
Hostname
OL-4015-12
Do this:
Click Add, and add the pre-shared key in the Adda new Pre
Shared Key window.
Select the pre-shared key, and click Edit. Then edit the key in
the Edit Pre Shared Key window.
Select the pre-shared key, and click Remove.
Use this window to add or edit a pre-shared key.
This is an alphanumeric string that will be exchanged with the remote peer. The
same key must be configured on the remote peer. You should make this key
difficult to guess. Question marks (?) and spaces must not be used in the
pre-shared key.
Enter the same string that you entered in the Key field, for confirmation.
Select Hostname if you want the key to apply to a specific host. Select
IP Address if you want to specify a network or subnetwork, or if you want to
enter the IP address of a specific host because there is no DNS server to translate
host names to IP addresses
This field appears if you selected "Hostname" in the Peer field. Enter the peer's
host name. There must be a DNS server on the network capable of resolving the
host name to an IP address.
Cisco Router and Security Device Manager 2.5 User's Guide
Internet Key Exchange (IKE)
18-7