Cisco ROUTER-SDM-CD User Manual page 324

Administering Easy VPN Remote Connections
Table 12-11 Easy VPN Settings Fields
Element
Add
Delete
Move Up
Move Down
Outside Interface Toward Server
or Concentrator
Inside Interfaces
Add or Edit Easy VPN Remote: Authentication Information
Cisco Router and Security Device Manager 2.5 User's Guide
12-30
Description
Click Add to specify the name or the IP address of a VPN
concentrator or server for the router to connect to; then enter the
address or hostname in the window displayed.
Click Delete to delete the chosen server IP address or hostname.
Click Move Up to move the specified server IP address or hostname
up in the list. The router attempts to contact routers in the order in
which they appear in this list.
Click Move Down to move the specified IP address or hostname
down the list.
Choose the interface that has the connection to the Easy VPN server
or concentrator.
Cisco 800 routers do not support the use of interface E 0 as
Note
the outside interface.
Specify the inside interfaces to include in this Easy VPN
configuration. All hosts connected to these interfaces will be part of
the VPN. As many as three inside interfaces are supported on Cisco
800 series and Cisco 1700 series routers.
An interface cannot be designated as both an inside and an
Note
outside interface.
Use this window to enter the information required for the router to be
authenticated by the Easy VPN server or concentrator.
Field Reference
Table 12-12 describes the fields in this screen.
Chapter 12 Easy VPN Remote
OL-4015-12