Add An Ntp Server - Cisco ROUTER-SDM-CD User Manual

Chapter 31 Router Properties
Note
Property
Value
Add
Edit
Delete

Add an NTP Server

Note
OL-4015-12
source will have more consistent time settings. This window allows you to view
the NTP server information that has been configured, to add new information, or
to edit or delete existing information.
If your router does not support NTP commands, this branch will not appear in the
Router Properties tree.
The system-defined name for this NTP server.
The IP address for this NTP server.
Click to add NTP server information.
Click to edit a specified NTP server configuration.
Click to delete a specified NTP server configuration.
Enter the IP address of an
An extended access rule will be created for port 123 traffic and applied to the
interface that you choose in this window. If an access rule was already in place for
this interface, Cisco SDM will add statements to permit port 123 traffic on this
interface. If the existing rule was a standard access rule, Cisco SDM changes it to
an extended rule in order to be able to specify traffic type and destination.
Cisco Router and Security Device Manager 2.5 User's Guide
NTP server in this window.
Date and Time: Clock Properties
31-7