Edit Nac Tab - Cisco ROUTER-SDM-CD User Manual

Chapter 30 Network Admission Control

Edit NAC Tab

NAC Timeouts Button
OL-4015-12
Here is an example of a NAC configuration summary:
NAC Interface: FastEthernet0/1.42
Admission Name:: SDM_EOU_3
AAA Client Source Interface: FastEthernet0/1.40
NAC Policy Server 1:
Exception List
----------------------------------------------------------------------
Address/Device IP Address
Policy Details:
Policy Name:
Redirect URL:
Access Rule:
----------------------------------------------------------------------
Enabled agentless host policy
Username: bill
Password: ******
In this example, RADIUS packets will have the IP address of FastEthernet 0/1.40.
NAC is enabled on FastEthernet 0/1.42, and the NAC policy that the wizard
applied is SDM_EOU_3. One host has been named in the exception list, and its
access to the network is controlled by the exception policy P55.
The Edit NAC tab lists the NAC policies configured on the router and enables you
to configure other NAC settings. A NAC policy must be configured for each
interface on which posture validation is to be performed.
The router and the client use Extensible Authentication Protocol over
Unformatted Data Protocol (EAPoUDP) to exchange
Default values for EAPoUDP timeout settings are preconfigured, but you can
change the settings. This button is disabled if there is no NAC policy configured
on the router.
Cisco Router and Security Device Manager 2.5 User's Guide
10.77.158.54
(22.22.22.2) newly added
P55
http://www.fix.com
test11
Edit NAC Tab
posture information.
30-13