Cisco ROUTER-SDM-CD User Manual page 389

Chapter 15 DMVPN
Interface
IPSec Profile
IP Address
Description
Details panel
Why Are some Tunnels Interfaces Shown as Read-Only?
Add
Edit
OL-4015-12
The physical interface from which this tunnel originates.
The IPSec profile that the tunnel uses. The IPSec profile defines the transform sets
that are used to encrypt traffic on the tunnel. Cisco SDM supports the use of only
IPSec profiles to define encryption in a DMVPN. If you want to use crypto-maps,
configure the DMVPN using the CLI.
The IP address of the GRE tunnel. The GRE tunnel is used to send routing updates
to the DMVPN.
A description of this tunnel.
The Details panel shows the values for the entire configuration of the DMVPN
tunnel.
A tunnel interface is shown as read-only if it has already been configured with
crypto-map associations and NHRP parameters. You will be able to modify NHRP
parameters and routing information from this window, but you must edit the IP
address, tunnel source, and tunnel destination from the Interfaces and
Connections window.
Click to add a new DMVPN tunnel configuration.
Click to edit a selected DMVPN tunnel configuration.
Cisco Router and Security Device Manager 2.5 User's Guide
Edit Dynamic Multipoint VPN (DMVPN)
15-13