Edit Global Settings - Cisco ROUTER-SDM-CD User Manual

Edit IPS
Reload Signatures

Edit Global Settings

Enable Syslog Notification (Syslog and SDEE Tab)
SDEE (Syslog and SDEE Tab)
Enable Engine Fail Closed (Global Engine Tab)
Cisco Router and Security Device Manager 2.5 User's Guide
27-16
Move Up an d Move Down Buttons
Use to change the order of preference for the URLs in the list.
Click to recompile signatures in all signature engines. During the time that
signatures are being recompiled in a signature engine, the Cisco IOS software can
not use that engine's signatures to scan packets.
Edit settings that affect the overall operation of Cisco IOS IPS in this window, in
the Syslog and SDEE and Global Engine tabs.
Check this checkbox to enable the router to send alarm, event, and error messages
to a syslog server. A syslog server must be identified in System Properties for this
notification method to work.
Enter the number of concurrent SDEE subscriptions, in the range of 1–3, in the
Number of concurrent SDEE subscriptions field. An SDEE subscription is a
live feed of SDEE events.
In the Maximum number of SDEE alerts to store field, enter the maximum
number of SDEE alerts that you want the router to store, in the range of 10–2000.
Storing more alerts uses more router memory.
In the Maximum number of SDEE messages to store field, enter the maximum
number of SDEE messages that you want the router to store, in the range of
10–500. Storing more messages uses more router memory.
By default, while the Cisco IOS software compiles a new signature for a particular
engine, it allows packets to pass through without scanning for the corresponding
engine. Enable this option to make the Cisco IOS software drop packets during
the compilation process.
Chapter 27 Cisco IOS IPS
OL-4015-12