Select Interface; Summary - Cisco ROUTER-SDM-CD User Manual

Configuring a Cable Modem Connection
Cable Modem Connection Wizard Welcome

Select Interface

Table 5-20 Select Interface
Element
Select an interface for the WAN
connection
Enable Dynamic DNS
Dynamic DNS

Summary

Cisco Router and Security Device Manager 2.5 User's Guide
5-30
The Welcome screen indicates that you are using the cable modem connection
wizard, and describes the tasks you perform when you configure a Cable Modem
connection.
Click Next to begin configuring the connection.
Select the cable modem interface to configure in this screen. The interface that
you select will be configured as a DHCP client.
Field Reference
Table 5-20 describes the fields in this screen.
Description
Choose the cable modem interface that you want to configure.
Check Enable Dynamic DNS if you want to update your DNS
servers automatically whenever the WAN interface IP address
changes.
Click the Dynamic DNS button to configure a dynamic DNS
method. See
information.
The Summary screen shows the configuration you are sending to the router. Cisco
SDM configures a cable modem connection as a DHCP client. The following lines
show cable modem connection with no NAT or static route configuration
Selected Interface: Cable Modem 0/1/0
IP Address: Dynamic (DHCP Client)
Chapter 5
Add or Edit Dynamic DNS Method
Configuring WAN Connections
for more
OL-4015-12