Cisco ROUTER-SDM-CD User Manual page 314

Administering Easy VPN Remote Connections
Table 12-7 Edit Easy VPN Remote Fields
Element
Status
Name
Cisco Router and Security Device Manager 2.5 User's Guide
12-20
Description
This button is labeled Login if all of the following are true:
The Easy VPN server or concentrator being connected to uses
•
XAuth.
The XAuth response is set to be requested from Cisco SDM or
•
the router console.
The tunnel is waiting for XAuth credentials (the connection has
•
been initiated).
Click Login to login to the Easy VPN server and establish the
connection.
If the connection is set to automatic or traffic-based tunnel control,
this button is disabled.
The connection is up. When an Easy VPN connection is up, the
Disconnect button enables you to deactivate the connection if
manual tunnel control is used.
The connection is down. When an Easy VPN connection is down,
the Connect button enables you to activate the connection if manual
tunnel control is used.
The connection is being established.
Xauth Required—The Easy VPN server or concentrator requires an
XAuth login and password. Use the Login button to enter the login
ID and password and establish the connection.
Configuration Changed—The configuration for this connection has
been changed, and needs to be delivered to the router. If the
connection uses manual tunnel control, use the Connect button to
establish the connection.
The name given to this Easy VPN connection.
Chapter 12 Easy VPN Remote
OL-4015-12