Dynamic Multipoint Vpn (Dmvpn) Hub Wizard - Cisco ROUTER-SDM-CD User Manual

Dynamic Multipoint VPN
Create a spoke (client) in Dynamic Multipoint VPN
Create a hub (server or head-end) in Dynamic Multipoint VPN

Dynamic Multipoint VPN (DMVPN) Hub Wizard

Cisco Router and Security Device Manager 2.5 User's Guide
15-2
It is important to configure the hub first because spokes must be configured using
information about the hub. If you are configuring a hub, you can use the
SpokeConfiguration feature available in the Summary window to generate a
procedure that you can send to spoke administrators so that they can configure the
spokes with the correct hub information. If you are configuring a spoke, you must
obtain the correct information about the hub before you begin.
Select if your router is a spoke in the
endpoints in the network. Before starting configuration, you should ping the hub
to be sure you have connectivity to it, and have all the necessary information about
the hub configuration that you need. This information is listed in
Multipoint VPN (DMVPN) Spoke
Select if your router is a hub in the
point in a DMVPN network, and is connected to each spoke router via a
point-to-point IPSec connection. The hub can route IPSec traffic between the
spoke routers in the network.
This wizard will help you configure your router as a
be configured before the spokes so that you can provide the spoke administrators
with the information they need to configure their spoke routers.
The application window explains what you will be configuring. After you have
finished, you will need to provide spoke administrators with the following
information about the hub:
The IP address of the hub router's physical interface.
•
The IP address of the hub's mGRE tunnel interface.
•
The dynamic routing protocol to use to send routing updates to the DMVPN,
•
and the autonomous system (AS) number (for EIGRP), or process ID (for
OSPF) that should be used.
DMVPN network. Spokes are the logical
Wizard.
DMVPN network. The hub is the logical center
DMVPN
Chapter 15 DMVPN
Dynamic
hub. The hub should
OL-4015-12