Cisco ROUTER-SDM-CD User Manual page 338

Creating an Easy VPN Server Connection
Complete these steps to configure an Easy VPN Server connection using the Easy
VPN Server wizard:
If you want to review the Cisco IOS CLI commands that you send to the router
Step 1
when you complete the configuration, go to the Cisco SDM toolbar, and click Edit
> Preferences > Preview commands before delivering to router. The preview
screen allows you to cancel the configuration if you want to.
In the Cisco SDM toolbar, click Configure.
Step 2
In the Cisco SDM taskbar, click VPN.
Step 3
In the VPN tree, click Easy VPN Server.
Step 4
In the Create Easy VPN Server tab, complete any recommended tasks that are
Step 5
displayed by clicking the link for the task. Cisco SDM either completes the task
for you, or displays the necessary configuration screens for you to make settings
in.
Click Launch Easy VPN Server Wizard to begin configuring the connection.
Step 6
Make configuration settings in the wizard screens. Click Next to go from the
Step 7
current screen to the next screen. Click Back to return to a screen you have
previously visited.
Cisco SDM displays the Summary screen when you have completed the
Step 8
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.
If you want to test the connection after sending the configuration to the router,
Step 9
check Test the connectivity after configuring. After you click Finish, Cisco
SDM tests the connection and displays the test results in another screen.
To send the configuration to the router, click Finish.
Step 10
If you checked Preview commands before delivering to router in the Edit
Step 11
Preferences screen, the Cisco IOS CLI commands that you are sending are
displayed. Click OK to send the configuration to the router, or click Cancel to
discard it. If you did not make this setting, clicking Finish sends the configuration
to the router.
Create an Easy VPN Server Reference
to create an Easy VPN server connection.
Cisco Router and Security Device Manager 2.5 User's Guide
13-2
Chapter 13
describes the configuration screens you use
Easy VPN Server
OL-4015-12