Configuring Wan Connections; Configuring An Ethernet Wan Connection - Cisco ROUTER-SDM-CD User Manual

Configuring an Ethernet WAN Connection

Step 1
Step 2
Step 3
OL-4015-12

Configuring WAN Connections

The WAN wizards enable you to configure WAN connections for all Cisco
SDM-supported interfaces.
This chapter contains the following sections:
Configuring an Ethernet WAN Connection
•
Configuring a Serial Connection
•
Configuring a DSL Connection
•
Configuring an ISDN Connection
•
Configuring an Aux Backup Connection
•
Configuring an Analog Modem Connection
•
Configuring a Cable Modem Connection
•
Complete these steps to configure an Ethernet WAN Connection:
If you want to review the IOS CLI commands that you send to the router when
you complete the configuration, go to the Cisco SDM toolbar, and click Edit >
Preferences > Preview commands before delivering to router.
In the Cisco SDM toolbar, click Configure.
In the Cisco SDM taskbar, click Interfaces and Connections.
Cisco Router and Security Device Manager 2.5 User's Guide
C H A P T E R
5
5-1