Ping; Generate Mirror - Cisco ROUTER-SDM-CD User Manual

Chapter 11 Site-to-Site VPN

Ping

Source
Destination
To ping a remote peer:
To clear the output of the ping command:

Generate Mirror...

Peer Device
OL-4015-12
You can ping a peer device in this window. You can select both the source and
destination of the ping operation. You may want to ping a remote peer after you
reset a VPN tunnel.
Select or enter the IP address where you want the ping to originate. If the address
you want to use is not in the list, you can enter a different one in the field. The
ping can originate from any interface on the router. By default, the ping command
originates from the outside interface with the connection to the remote device.
Select the IP address that you want to ping. If the address you want to use is not
in the list, you can enter a different one in the field.
Specify the source and destination, and click Ping. You can read the output of the
ping command to determine whether the ping was successful.
Click Clear.
This window shows you the IPSec policy used for the VPN tunnel to the selected
peer, and allows you to save the policy in a text file that you can use when
configuring the VPN connection on the peer device.
Select the IP address or host name of the peer device to see the IPSec policy
configured for the tunnel to that device. The policy appears in the box under the
peer IP address.
Cisco Router and Security Device Manager 2.5 User's Guide
Edit Site-to-Site VPN
11-29