Packages - Cisco ROUTER-SDM-CD User Manual

Chapter 21 Cisco IOS SSL VPN
Enable Gateway Checkbox

Packages

Note
OL-4015-12
Uncheck if you do not want to enable the gateway. You can also enable and disable
the gateway from the SSL VPN Gateways window.
This window enables you to obtain software install bundles that must be
downloaded to Cisco IOS SSL VPN clients to support Cisco IOS SSL VPN
features, and to load them on the router. You can also use this window to remove
install bundles that have been installed.
Follow the steps described in the window to download the install bundles from
Cisco.com to your PC, and then copy them from your PC to the router. If you need
to obtain any of the install bundles, start with Step 1 by clicking on the link to the
download site.
Access to these download sites requires a CCO username and password. If you
don't have a CCO username and password, you can obtain one by clicking
Register at the top of any Cisco.com webpage, and completing the form that is
displayed. Your username and password will be mailed to you.
If you have already loaded install bundles onto your PC or the router, complete
steps 2 and 3 to specify the current location of the install bundles and copy them
to router flash.
Click the ... button in each section to specify the current location of the install
bundle.
After you specify the current location, and where you want to copy it to in router
flash, click Install.
After the bundles have been loaded onto the router, the window displays name,
version, and build date information about the package. If an administration tool is
available with the package, the window displays a button enabling you to run this
tool.
The Cisco IOS SSL VPN client install bundle is available from the following link:
http://www.cisco.com/cgi-bin/tablebuild.pl/sslvpnclient
The Cisco Secure Desktop install bundle is available from the following link:
Cisco Router and Security Device Manager 2.5 User's Guide
Editing SSL VPN Connections
21-39