Table of Contents
Advertisement
Creating Users and Setting Security
Procedure: Create New Users
Step 1
In network view, select the Provisioning > Security tabs.
Step 2
On the Security pane, click Create.
In the Create User dialog box, enter the following:
Step 3
•
•
•
•
Under "Select applicable nodes," deselect any nodes where you do not want to add the user (all network
Step 4
nodes are selected by default).
Step 5
Click OK.
Procedure: Edit a User
Step 1
In network view, select the Provisioning > Security tabs.
Click Change.
Step 2
Step 3
On the Change User dialog box, edit the user information: name, password, password confirmation,
and/or security level. (A Superuser does not need to enter an old password. Other users must enter their
old password when changing their own passwords.)
Note
Step 4
If you do not want the user changes to apply to all network nodes, deselect the unchanged nodes in the
Change Users dialog box.
Step 5
Click OK.
Changed user permissions and access levels do not take effect until the user logs out of CTC and logs
back in.
Procedure: Delete a User
In network view, select the Provisioning > Security tabs.
Step 1
Click Delete.
Step 2
Step 3
On the Delete User dialog box, enter the name of the user you want to delete.
Step 4
If you do not want to delete the user from all network nodes, deselect the nodes.
Cisco ONS 15454 Installation and Operations Guide
3-8
Name—Type the user name.
Password—Type the user password. The password must be a minimum of six and a maximum of ten
alphanumeric (a-z, A-Z, 0-9) and special characters (+, #, %), where at least two characters are
non-alphabetic and at least one character is a special character.
Confirm Password—Type the password again to confirm it.
Security Level—Select the user's security level.
You cannot change the CISCO15 user name.
Chapter 3
Node Setup
November 2001
Advertisement
Table of Contents
