Show Port-Channel Brief; Management Commands; Bridge Aging-Time - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

show port-channel brief

This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
Mode
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Active Ports

Management Commands

These commands manage the switch and show current management settings.

bridge aging-time

This command configures the forwarding database address aging timeout in seconds. In an IVL
system, the [fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not
used and will be ignored if entered.
Default
Format
Mode
Switching Commands
no port-channel staticcapability
Global Config
show port-channel brief
Privileged EXEC and User EXEC
This field displays whether or not the device has static capability
enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-channel, in
slot/port notation.
This field lists the ports that are actively participating in this port-
channel.
.
300
bridge aging-time <10-1,000,000> [fdbid | all]
Global Config
December 2004, 202-10010-02
8-17