Status Leds - Cisco Firepower 1010 Series Hardware Installation Manual

Overview
Figure 7: Firepower 1010 and 1010E Rear Panel
1
3
5
7
9

Status LEDs

Facing the rear of the chassis, the LEDs are located on the top left edge (facing the front of the chassis, they
are in the back right corner of the top). The network port LEDs are at the top sides of each network port.
The following figure shows the status LEDs on the rear panel and on the cover of the chassis.
Status LEDs
Lock slot
Network data ports
USB Mini B port
Reset button
2 Management port
4 Power cord socket
6 Console port
8 USB Type A port
10 Rubber feet
Cisco Firepower 1010 Series Hardware Installation Guide
Status LEDs
11