Download  Print this page

Advertisement

DCA/Mute Groups
DCA/Mute Groups
The RIVAGE PM10 system provides 24 DCAs and 12 mute groups. A group name can be assigned
to each DCA and mute group.
 DCA
DCA 1 – 24 can be used with both input channels and output channels. Both types of channel can
exist in the same group.
DCA settings can be saved and recalled using the dedicated library. The library contains channel
information for the channels that belong to the DCA, and the name and color of the DCA.
• DCA Cue
Allows you to cue the channels belonging to the DCA in a single operation.
• DCA Unity
Allows you to monitor the corresponding DCA at unity gain (the same level as when the DCA
fader is set to 0 dB).
• DCA ROLL-OUT
The channels belonging to the DCA are temporarily assigned to the panel faders, allowing
them to be operated individually.
 Mute groups
Mute groups 1 – 12 can be used with both input channels and output channels. Both types of
channel can exist in the same group.
• Mute Safe
Specific channels that belong to a mute group can be temporarily excluded from mute group
operations.
• Mute Dimmer
A fixed amount of attenuation can be specified for each mute group.
Mute settings can be saved and recalled using the dedicated library. The library contains channel
information for the channels that belong to the mute group, and the name of the mute group.
GEQ/PEQ
The RIVAGE PM10 system provides 31-band GEQ, Flex15 GEQ, and 8-band PEQ. Each type can be
used by inserting it in an insert point.
EQ Type
Number usable
31BandGEQ
48
Flex15GEQ
96
8 Band PEQ
96
 GEQ
• GEQ TYPE
You can use two types of GEQ: 31-band GEQ which enables you to freely adjust thirty-one
bands (frequency regions), and Flex15 GEQ which enables you to adjust any fifteen of thirty-
one bands. If you are using a stereo source, link two GEQ units.
• RTA
You can use a 1/12 octave (121 band) realtime analyzer (also known as a spectrum analyzer).
• Gain range
You can select ±15 dB, ±12 dB, ±6 dB (boost or cut), or -24 dB (cut only).
 PEQ
• 8 Band PEQ
You can use an eight-band parametric EQ. Four notch filters are also provided.
• RTA
You can use a 1/12 octave (121 band) realtime analyzer (also known as a spectrum analyzer).
Notch filters 1 – 4 are independent of the PEQ, and are not affected by the BYPASS buttons of the PEQ. You
can also bypass the PEQ and use only the notch filters.
32
FAQ
CONTENTS
RIVAGE PM10 Operation Manual

Advertisement

Table of Contents

   Related Manuals for Yamaha rivage pm10

Comments to this Manuals

Symbols: 0
Latest comments: