Table of Contents
Advertisement
Startup Procedures
Startup Menu Procedures
The procedures called from the Startup menu cover software download, flash handling and password
recovery. The diagnostics procedures are for use by technical support personnel only and are not disclosed in
the document.
The Startup menu can be entered when booting the device – a user input must be entered immediately after
the POST test.
To enter the Startup menu:
1 Turn the power on and watch for the auto-boot message.
**************************************************
*****************
SYSTEM RESET
*****************
**************************************************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.20 Built
22-Jan-xxxx
15:09:28
Processor: FireFox 88E6218 ARM946E-S , 64 MByte SDRAM.
I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
50
Starting and Configuring the Device
Advertisement
Table of Contents
