Ct1 And Ce1 Trunk Card Port Monitoring - Cisco AS5800 Manual

status and port­level monitoring information. shows the trunk card
LEDs.
Figure 5 CT1 and CE1 Trunk Card Front Panel LEDs
There are two types of LEDs for the T1 and E1 trunk cards:
• Card­level LEDs, which provide status information for card
maintenance
• Port­associated LEDs, which provide warning signals and
configuration status on a per­port basis.
All LEDs are visible from the front panel. (See .) lists the CT1 and CE1
trunk card LEDs and their functions.
Table 1 CT1 and CE1 Trunk Card LED Descriptions
Indicator Color Description
PWR (Power Green Lights when 5V power is
OK) active.
Maint Yellow Lights when there are no
(Maintenance) active calls on the card and
you have completed a card­
level software busyout.
Indicates the card is ready to
be removed.
E1FR (E1 Green E1 trunk card only. Lights
Framing) when the card is configured
for E1 framing.
T1FR (T1 Green T1 trunk card only. Lights
Framing) when the card is configured
for T1 framing.
HCPU (Host Green Lights when the host CPU is
CPU OK) operating normally.
FCPU (Framer Green Lights when the framer CPU is
CPU OK) operating normally.
CT1 and CE1 Trunk Card Port Monitoring
The CT1 and CE1 trunk card front panels are designed with a liquid
crystal display (LCD) to provide trunk card status and port­level
monitoring information (see and ). The current port number displayed
in the LCD also corresponds to the four port­associated LEDs.
describes the port­associated LEDs and their functions.
Table 2 CT1 and CE1 Trunk Card Port­Associated LEDs
Indicator Color Description