Reports - Activity Report - OKIDATA OF1000 Service Manual

4.7 REPORTS
4.7.01 Activity
The Activity Report lists the Date, Time, Length of Session (in minutes), Total Pages, and the
Service Code. The Service Code represents the result of each activity. Service Codes are used to
determine if the session ended normally or not and are grouped as follows.
Service Code Type
Normal Termination Service Code in all modes
Error while dialing - Phase A
G3 Transmission - Phase B
G3 Reception - Phase C
G3 Transmission - Phase D
Miscellaneous Service Codes
The Activity Report can be requested in two ways.
· Automatic
The Activity Report will be printed after every 30 transmit or receive sessions
· Manual
The Activity Report will list the 30 most recent sessions.
NOTE:
To enable the Manual Activity Report, Refer to REPORTS - ACTIVITY REPORT, in the Okifax
1000 Operators Guide.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Service Code Group
0000
1xxx
2xxx
3xxx
41xx
6xxx & 9xxx
Page: 179