Rap 22D: Vertical Black Stripes On Printed Output - OKIDATA OF1000 Service Manual

RAP 22D: Vertical Black Stripes on Printed Output

NOTE:
If vertical black stripes are on the output upon receiving a fax, perform local copy before assuming
that your Okifax 1000 is defective. It is possible that the transmitting facsimile is defective.
START.
Is the TONER LOW message displayed?
YES Add toner.
NO Replace the image drum cartridge.
Has the problem been resolved?
YES End of procedure.
NO Replace the LED head.
Has the problem been resolved?
YES End of procedure.
NO Replace the printer control board (PCNT-150).
Has the problem been resolved?
YES End of procedure.
NO Replace the sub-power supply board (PSUB-150).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 164