Disassembly/Assembly Procedures - OKIDATA OF1000 Service Manual

Page: 66
Service Guide OF1000
Chapter 3 Maintenance & Disassembly

3.2 DISASSEMBLY/ASSEMBLY PROCEDURES

General Information
This section contains the disassembly procedures. Only the removal procedures are explained
here. Reverse the procedure for the installation.
At the bottom of each procedure is a listing of Okidata part numbers, item descriptions, and
cross-references to Appendix B. Items included in the Recommended Spare Parts List are
designated by the acronym RSPL. N/A will appear where a part number is not available.
This Service Handbook lists the disassembly procedures for major components of the unit. If you
decide to perform disassembly during this training, Okidata recommends that you perform only
the disassembly procedures for RSPL items. All other procedures are provided to assist you in
identifying parts. It is not likely that you will perform these procedures while servicing the unit.
Be sure to read all notes, cautions, and warnings, as they contain important information regarding
disassembly / assembly.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)