3.2.16 Right Side Cover
CAUTION
Do NOT attempt to remove the right side cover until the memory card has been removed.
To completely remove the right side cover, you must also remove the speaker.
1. Perform these procedures:
3.2.01
3.2.15
2. Raise the control panel unit (1).
3. Remove the two screws (2).
4. Raise the document guide table (3) and copy stacker (4).
5. Remove the screw (5).
6. Remove the right side cover (6).
P/N N/A Screw
RSPL B.2.01
P/N 53069801 Cover: Side (Right)
P/N 56628507 Cable: PCNT-2nd Tray PCB
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
RSPL B.2.01
B.2.17
Page: 82