Rap 19: Document Skews - OKIDATA OF1000 Service Manual

RAP 19: Document Skews

START
Make sure the document guides are set to the width of the document.
Is the problem resolved?
YES End of procedure.
NO Clean the separation rubber, feed rollers, sub-roller and ADF roller.
Is the problem resolved?
YES End of procedure.
NO Push on the separation rubber. Does it spring back to its original position?
Is the problem resolved?
YES End of procedure.
NO Check the tension of the ADF spring.
Is the problem resolved?
NO Replace the ADF assembly.
YES End of procedure.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
NO Replace the ADF assembly.
YES Replace the separation rubber.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 150