Rap 03: Local Copy Problem - OKIDATA OF1000 Service Manual

RAP 03: Local Copy Problem

START
Perform the Scanner Operation / Calibration Test
Is the message RESULT OK displayed on the LCD?
NO Replace the contact image sensor.
Perform the Scanner Operation / Calibration Test
Is the message RESULT OK displayed on the LCD?
YES End of procedure.
NO Replace the PCNT-150 board.
YES Perform the Printer Unit Print Test
Are horizontal lines being printed?
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
(Refer to Section 4.6
YES Is the print quality acceptable?
NO Refer to
YES Replace the MCNT-150.
NO Refer to RAP 14
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
(Refer to Section 4.6
(Refer to Section 4.6
)
RAP 22 .
.
Page: 134
).
)