Paper Inlet Jam - OKIDATA OF1000 Service Manual

Page: 62
Service Guide OF1000
Chapter 2 Principles of Operation

Paper Inlet Jam

This jam occurs when either of the following conditions occur.
· When the printer is powered ON, paper is at inlet sensor 1.
· After the hopping operation is attempted three times, the leading edge of the paper does NOT
reach inlet sensor 1.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)