Gear Frame And Gears - OKIDATA OF1000 Service Manual

3.2.14 Gear Frame and Gears

1. Perform these procedures:
3.2.01
3.2.09
3.2.11
3.2.12
3.2.13
2. Remove the four screws (1).
3. Remove the heat sink (2).
4. Remove the four gears.
Gear Z81 / 15 (3)
Gear Z31 / 19 (4)
Gear Z43 (5)
NOTE:
Lubrication
Lightly lubricate the gears.
details .
P/N N/A Screw RSPL B.2.09
P/N N/A Heat Sink RSPL B.2.09
P/N N/A Gear: Z81/15
P/N N/A Gear: Z31/19
P/N N/A Gear: Z43 RSPL B.2.09
P/N N/A Frame: Gear
P/N N/A Plate: Earth (ADF)
P/N N/A Plate: Earth (F2)
P/N N/A Spring Washer
Refer to Section 3.5 of this Service Handbook for lubrication
RSPL B.2.09
RSPL B.2.09
RSPL B.2.09
RSPL B.2.09
RSPL B.2.09
RSPL B.2.09
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 80