Service Codes List - OKIDATA OF1000 Service Manual

Service Codes List

Code Description
0000 Successful end of communication.
1080 STOP key has been pressed while calling a remote
fax.
10A2 Busy tone detected.
14A3 Second dial tone not detected
14C0 Dial tone not detected.
14C1 Line current not detected.
14C2 Calling-and-waiting for line connection time
out.
14C3 Dialing limit time out.
21A0 Received signal other than DIS/DTC.
21A1 Contents of received DIS/DTC are faulty.
21A2 TCF is sent three times and DIS/DTC is received
each time in response.
21A3 TCF is sent three times and the receiver has not
responded.
21A4 TCF fall-back is not possible.
21A5 Received signal other than the desired signal in
response to sending TCF.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 180