Adf Roller Assembly - OKIDATA OF1000 Service Manual

3.2.28 ADF Roller Assembly

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
2. Remove the ADF roller assembly (1).
NOTE:
The ADF roller assembly consists of the ADF feed roller, the ADF shaft, the ADF (B) collar, the
Z49 gear, the ADF roller spring, the ADF bearing, the E-ring, and the compression washer. To
replace any of these parts, order the assembly.
Cleaning
Clean the ADF roller as necessary.
details .
Lubrication
Lightly lubricate the Z49 gear.
details .
P/N 50405801 Roller: ADF Assembly
P/N N/A Bearing: ADF
P/N N/A Collar: ADF (B)
P/N N/A E-Ring RSPL B.2.11
P/N N/A Gear: Z49 RSPL B.2.11
P/N N/A Roller: ADF Feed
P/N N/A Shaft: ADF RSPL B.2.11
P/N N/A Spring: ADF Roller
P/N 50516401 Washer: Compression
Refer to Section 3.4 of this Service Handbook for cleaning
Refer to Section 3.5 of this Service Handbook for lubrication
RSPL B.2.11
RSPL B.2.11
RSPL B.2.11
RSPL B.2.11
RSPL B.2.11
RSPL B.2.11
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 94