Line Board (Line-Ju) - OKIDATA OF1000 Service Manual

3.2.04 Line Board (LINE-JU)

1. Perform these procedures:
3.2.01
3.2.03
2. Detach the cable to connector CN2 of the line board (LINE-JU) (1).
3. Detach the cable to connector CN5 of the board.
4. Remove the two screws (2).
5. Remove the board.
P/N 55073401 PCB: Line-JU
P/N 53070901 Cover: Ring Volume Switch
P/N 56628510 Cable: NCU-Line (8 pin)
P/N 56628901 Cable: NCU-Line (2 Pin)
Chapter 3 Maintenance & Disassembly
RSPL B.2.07
RSPL B.2.07
B.2.16
B.2.16
Service Guide OF1000
Page: 70