3.2.38 Second Tray Interface Board
1. Perform these procedures:
3.2.01
3.2.03
3.2.15
3.2.16
2. Detach the cable from connector CN7 of the PCNT board. (Static prevention)
3. Remove the screw (1).
4. Pull the board and cable gently from the base frame.
5. Disconnect the connector (2).
6. Remove the second tray board (3).
NOTE:
The Cable: PCNT-2nd Tray PCB connects the second tray interface board to CN 7 of the
board (PCNT).
P/N N/A Screw
RSPL B.2.08
P/N 55073901 PCB: 2nd Tray Interface
P/N 56628507 Cable: PCNT-2nd Tray PCB
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
RSPL B.2.08
B.2.17
Page: 104